I just finished a wood floor with oil based polyurethane. I only have one coat. Is it possible to put on the remaining coats with water based poly urethane? If so – any. Yes, you can top-coat with Water–based. Depending on .
My plan would be put a water base finish on the bench after we give. to determine the best method for putting water based finish over oil base.
. In this video, Tom Monahan of General Finishes explains how you .. how you can use oil based and water.
Applying Polyurethane: A water based polyurethane over an oil based stain PRODUCTS USED: Stain.
Make sure that the water–based polyurethane coating is fully cured. If you just applied the coating yourself, read the can to find out how long the curing time is.
Recoating a water–based acrylic floor finish with oil–based polyurethane is not usually a problem, so long as the old finish is properly buffed and cleaned.
Pros and Cons of water–based and oil–based polyurethane. Water–based finishes dry fastâ€”most within two hoursâ€”so you can apply several coats in. There's debate over which finish is harder, but some experts maintain that hardness isn't .
FOR PROJECT APPLICATION: 1. Surface must be dry and free of old finishes in poor condition, paint, wax, grease, polish, dirt or other foreign matter. 2. Sand to .
Is this answer still relevant and up to date? Related Questions (More Answers Below). How do I use oil–based polyurethane over water based polyurethane?