Make Dado Blade For Circular Saw

Make Dado Blade For Circular Saw

Is it possible to put a dado blade on a portable circular saw?. Cable sidewinder, but it would be worth it to get a worm drive if necessary.
If your circular saw leaves the shelf only to trim deck boards or knock down sheets. If you're making extra-deep cuts, reduce the fence height from 3/4" to 3/8" to. Next, adjust the saw blade to cut the dado depth plus 1⁄ 2 " (the thickness of the .
To get extra width, its possible to put shims between the blades, up to nearly a milimeter before the blades leave a piece of wood in between. This way. A dado by stacking cheap 7 1/2" saw blades. Dadoes with a hand held circular saw.
This led me to refine my technique, so I figured I'd make short article and video on it.. I made two guide fences to clamp to the 2×8 to help guide my circular saw. Each fence has the width of the edge of the shoe to the blade built into it, so I just .
It suddenly occurred to me that I might be able to make up a cheap dado blade from 7 1/4" circular saw blades by alternating teeth alignment so .

More post from my site

Leave a Comment