Recoat within 2 hours. If unable to do so, wait a minimum of 72 hours, then lightly sand and recoat. Apply at least three coats on unfinished wood and two coats on surfaces already finished. After final coat, allow 24 hours before normal use.
MinwaxÂ® Fast–Drying Polyurethane 350 V.O.C. is a clear, oil-based, durable protective. Do not use a belt or drum-type sander for sanding between coats.
MinwaxÂ® Fast–Drying Polyurethane 550 V.O.C. is a clear oil-based, durable. in such a manner as to rotate the product from the bottom to the top of the can. NEVER. Dry times are based on application of thin coats, good ventilation, average .
2. After the wood is dry (minimum of 8 hours if stained), brush on a uniform coat of MinwaxÂ® Fast Drying Polyurethane. 3. Recoat after 4-6 hours – Sanding lightly between coats.
Directions. WARNING! Removal of old paint by sanding, scraping or other means may. from the bottom to the top of the can. NEVER SHAKE. 5. Apply a THIN coat of MinwaxÂ® Fast–Drying Polyurethane using a high- quality natural or foam .
. from fast–dry poly. First, the dry time is 3 to 4 hours, 25% faster. . Second, if you recoat within 12 hours, you don't have to sand between coats. Third, poly for
I just picked up a can of Minwax Fast Drying Poly the other day to finish a bed I've been. I also always sand with 320 grits between coats.. . After sanding down my third coat, I usually spray it down with a can of aerosol poly.