This raises the grain, creating little points you can sand off with 150-grit sandpaper, always working along the grain of the wood. Use a piece of jute string to sand inside turnings and a nylon kitchen scrubbing pad to work inside carvings. Go over the leg with 220-grit sandpaper prior to sealing or staining the wood.
You'll find tips on the best sanding technique and what grades of sandpaper and. Narrow rungs, spindles, legs, and other round parts need special treatment.
Strip-Sanding Spindles. Sanding intricately turned balusters or furniture legs is much easier with abrasive strips cut from a sanding belt. Slice or rip an appropriate-width strip from the belt, and wrap it around the turning. Then hold each end of the strip and pull it back and forth as if you're shining a shoe.
My wife and I didn't like the finish as we like to see the grain/figure of the wood in our furniture pieces. At first I was hesitant as there could be a .
Use folded up sandpaper or one of a number of detail sanding tools to sand wood carvings.. Whether you're refinishing antique furniture or getting a jewelry box that you. Pros: Contoured to fit exactly inside coves and around curved edges.