I just finished a wood floor with oil based polyurethane.. Is it possible to put on the remaining coats with water based poly urethane? If so – any .
Both water based and oil based poly offer good protection; the biggest difference is. There's debate over which finish is harder, but some experts maintain that .
In this video, Tom Monahan of General Finishes explains how you can use oil based and water based.
The latest issue of FWW had an article about using water–based poly over an initial wipe-on oil coat. The oil coat provide the beautiful figure .
If you want wood to keep its light color, use a water–based poly. 3 Ã—. To keep a partially filled can of oil–based poly from skinning over, cover the finish with this .
Water–based polyurethane runs about $40 per gallon, enough to cover 600 square feet of. A gallon of oil–based poly costs around $25, enough for 400 square feet.. Waxes: Some floors have wax as the only finish, or the wax is applied over .
Oil based paint of urethanes or water based finishes for your urethane coating?. color, you then apply two coats of clear urethane over the pigmented coating.
Water–based paints, such as latex and acrylics, are desirable because they are much safer and dry much faster than oil–based paints and do not require toxic .
How to Use Oilâ€Based Polyurethane over Waterâ€Based Polyurethane. Oil and water. Using it at half strength will make it act more like a wiping varnish. It dries